To operate DC and AC load with the help of Push to ON & OFF switch and a Switching Relay with holding circuit
Components
Relay
 rotate.png)
Fan
Push Buttons
Supply
Control circuit
Power circuit
Instructions
1. Click on the Control Circuit button in Control Circuit Section.
2. Get the required components in Control Circuit Section by clicking on components displayed in Components Section.
3. Establish the connections according to the control circuit diagram provided in Fig. (a).
4. Verify the control circuit by clicking on the Check Connections 1 button.
5. If Wrong Connections then click on Delete Connections 1 button to delete connections and make the right connections .
6. Once the Control Circuit is verified, switch to the Power Circuit Section , Choose between AC Load & DC Load .
7. Get the required components in Power Circuit Section by clicking on components displayed in Components Section.
8. Make the connections according to the Power Circuit diagram provided in Fig. (b).
9. Click on the Check Connections 2 button to validate the Power Circuit.
10. If Wrong Connections then click on Delete Connections 2 button to delete connections and make the right connections .
11. Once the Power Circuit is verified, switch On the Power Supplies.
12. Now hover on NO(PB) button to operate the LOAD , then click on NC(PB) button to break the circuit .
13. Click on the Print button to get a print of the webpage.
14. Click on the Reset button to refresh the webpage .
[🔴 Red Endpoint Denote Positive terminal.]
[🔵 Blue Endpoint Denote Negative terminal.]
